general VOIP/iiTalk settings
The following information will be useful should you need to use iiNet VOIP or iiTalk with a 3rd party VOIP enabled router or VOIP adapter (ATA Device). These are common settings that are used across a variety of VOIP hardware. Should you continue to experience difficulties, please contact your hardware manufacturer for further assistance.
VOIP SIP Domain:
iinetphone.iinet.net.au
SIP Server:
sip.state.iinet.net.au (where state is your location - eg NSW)
Username:
Enter your VOIP/iiTalk phone number (remove any formatting such as spaces and dashes)
Password:
Enter your special VOIP/ password (not the same as connection password)
Re-Registration Time Interval:
300 seconds
Codec Preference:
G729 followed by G711 (ulaw or alaw or both)
DNS:
Use SRV Records
Phone number:
your VOIP/iiTalk number (including area code)
Display name:
iinetphone
SIP domain:
iinetphone.iinet.net.au
SIP Server:
sip.state.iinet.net.au (where state is your location - eg VIC)
Username:
your VOIP/iiTalk number
Password:
your password for your VOIP/iiTalk service
Proxy IP:
sip.state.iinet.net.au (where state is your location - eg WA)
Registrar IP:
sip.state.iinet.net.au (where state is your location - eg NSW)
The SIP servers for each state are as follows:
| State | SIP Server |
|---|---|
| ACT | sip.act.iinet.net.au |
| NSW | sip.nsw.iinet.net.au |
| NT | sip.nt.iinet.net.au |
| QLD | sip.qld.iinet.net.au |
| SA | sip.sa.iinet.net.au |
| TAS | sip.tas.iinet.net.au |
| VIC | sip.vic.iinet.net.au |
| WA | sip.wa.iinet.net.au |
Firewall Settings
If stopping your firewall fixes any VOIP/iiTalk registration/calling issues, then you'll want to manually allow the following ports through:
UDP 5060: From sip.state.iinet.net.au (where state is your location - eg NSW)
UDP 35000-44999: From sip.state.iinet.net.au (where state is your location - eg WA)
UDP CPE Port: The port your CPE uses for RTP, eg 8000-8001 or 5061 or 16384 for Netcomm V300 firmware v04
